Make a Plant Pot Holder

A good woodworker has a number of basic joints in their virtual toolbelt that they can use for any project. We have devised a lovely one-day introduction to woodwork skills which is a homage to the not-so-humble mortise and tenon joint – one of the essential joints required if you are looking to create sturdy pieces of furniture that can be fitted together like a beautiful 3D puzzle.

A mortise (or mortice) and tenon joint connects two pieces of wood mainly when the adjoining pieces connect at right angles. In its most basic form, a mortise and tenon joint is both simple and strong and comprises two components, the mortise hole and the tenon tongue.

The tenon, formed on the end of a piece of wood generally referred to as a rail, fits into a square or rectangular hole cut into the other, corresponding piece of wood. The tenon is cut to fit the mortise hole exactly. It usually has shoulders that seat when the joint fully enters the mortise hole. The joint may be glued, pinned, or wedged to lock it in place.

Over the course of this hands-on, practical day the tutor will give you careful direction in the use of using traditional tools. You will learn how to measure and cut accurately, how to use a chisel to make four ‘mortise and tenons’, how to use a plane to shape and apply a smooth finish to edges, and how to slot it all firmly together.

The result will be a strong, standing plant pot holder that will proudly support a plant to brighten up a corner of any room and stand as a lasting testament to your joint making skills.

All necessary materials, including the use of tools, will be provided.

An elegant 20cm pot is included for you to take home with your new plant pot holder – we’ll leave it to you to decide how to fill it.

Geoff Davison

General Information

You will receive a courtesy reminder by email 1-2 days before the workshop/course begins.

Refreshments

Coffee, tea and biscuits are included in the course fee, but you will need to bring lunch with you or visit a nearby venue to purchase food.

Access

If you have any specific access or special needs, please contact us confidentially in advance by email info@thegoodlifecentre.co.uk. There is a small step to the entrance, and the toilet is on the ground floor.

All sewing workshops and occasionally lampshade making, tassel making and bookbinding workshops are located on the second floor. There is no lift access.

Refunds and cancellations

Please refer to our terms & conditions below.

Disclaimer

The information given is accurate at the time of publication. However, The Goodlife Centre reserves the right to cancel or amend courses if circumstances require.

Terms & Conditions

View our Terms and Conditions here.